Tutorial #3 is blackfrangipani's chest of drawers tutorial!
This one is a bit more complicated than the last two XD
The list of supplies on blackfrangipani's page is much longer than mine...
I opted for her simpler instructions when it came to things like attaching the drawer handles...
so I will be including my list of supplies. To see blackfrangipani's list,
please click the links above. :)
2. exacto knife
3. scrapbooking paper
4. paper glue (I used Elmers)
5. strong hold glue (I used gorilla glue)
7. thin balsa wood
8. foam core
9. ink pad
10. sharpie marker
11. rubber band
15. paint that matches inkpad
In blackfrangipani's tutorial, she used 10 matchboxes...
but I figured for my first try, I would make something more like a jewelry box,
and only use three.
Step 2:Using Elmer's glue, I covered one side of the matchbox.
Step 3:Repeat this step until all of your boxes are glued together.
(If you had boxes being lined up side by side, you would glue their sides together as well)
Step 5:While we wait for the body of the chest of drawers to dry,
we can start working on the drawers.
To begin, you will need the stamp pad and a marker of matching color.
Problems:The only *real* problem I had with this tutorial was blackfrangipani's suggestion of using ink.
Step 6:Coat the front, back, sides and bottom of the drawers in your ink color of choice,
then allow to dry.
1. Ink is messy, put a piece of paper under your work station.
Step 7:Sit back and eat some cookies...
now is when you have to wait for everything to dry.Next, we will break out the heavy duty glue.
Step 8:Now you'll need a pencil, the foam core and an exacto knife.
I also recommend having a spare matchbox around, for measuring.
On the foam core, trace the bottom of your chest of drawers.
blackfrangipani says she likes to add a layer of foam core to the bottom of the chest of drawers
because it gives it more weight, and makes it feel more realistic. I am inclined to agree.
Use the exacto to cut the foam core out.
If you have shaky or unsteady hands, I recommend using a ruler when you cut,
but I just did it freehand.
Step 9:Glue the foam core to the bottom of chest of drawers.
Before I attach the foam core, I use the marker (the one that matches the ink color) to color in the edges of the foam core.
Wrap a rubberband around the chest of drawers and let dry.
(You might be saying, "DUDE! You *just* said you colored the foam core... and now I see it, it's totally white!... this is the back side you're looking at... when the chest of drawers is comepleted, the back and sides will be covered, so no need to color them in :) )
When this is dry, though, it is a good time to color in all the edges of the cardboard with the marker that matches your inkpad.
Step 10:Trace the sides and back of the chest of drawers (including the foam core) onto the wood
Cut the wood using your exacto knife.
(again, if you have an unsteady hand, use a ruler to help guide your cut!)
Step 11:Glue the wood paneling to the sides.
I did the sides first, and then the back later, after the sides had dried.
Cut the rectangles you've traced out, and press them into the bottoms of the drawers.
There is no need to glue them. :)
Step 13:Once the body of the chest of drawers is all put together, and before applying the scrapbooking paper,
color in all the edges of your piece with the marker that matches your inkpad.
Now... mine didn't line up as nicely as blackfrangipani's did... so I also went in with some paint and a paintbrush and filled it in a bit.
Step 14:I apologize... but evidently I got over excited and forgot to take pics of the next few scrapbook paper cutout steps. I glued all of these pieces on with Elmer's Glue.
Anyways, trace the sides and back of the chest of drawers onto the back of the scrapbooking paper you want to cover it with, then cut those out.
Next, trace the top of the chest of drawers, but make it a little bit longer than the top, so you can overlap it onto the back. (You can kind of see the line where the paper from the top of the chest of drawers is covered by the paper on the back.
In gluing application, put the top piece of paper on first, then cover it with the back piece.
I used Gorilla Glue... which was scary... that stuff is serious gluing business...
but dang does it work!
Anyways, I opted for blackfrangipani's simpler drawer pulls.
You can go check out her post for directions on more elaborate ones.
Put a little dab of glue where you want the pulls (and legs, if you opt to add legs to your chest of drawers) to go, then attach and let dry (for as long as the glue bottle recommends)
You can see where I needed to take more care in not scuffing up my paper edges. *sigh*
I've no idea if my ink was too cheap, or what... but it DID NOT DRY... and continued to get all over my fingers, and thus all over my paper, and I was constantly afraid of getting it inadvertently all over my dolls as well.
I would not use ink again.
Or, at least, not THAT ink.
I really love this tutorial!
Overall, once you have the basic stuff you need to make it,
it's a pretty cheap tutorial with pretty awesome results!!!
Thank you, blackfrangipani!
I think for a first try, this turned out pretty cute, if not a bit... er... wonky.
As my father-in-law would say, "Not a right angle in the thing!"
... but admittedly, I wasn't *as* careful as I could have been when letting things dry and set,
so with practice, I think I could do better... and I would not blame the tutorial for the wonkiness of my chest of drawers.